An aquarium is a small living system. Fish need clean water, stable temperature and bacteria that break down waste. Setting it up patiently is the secret.
1. Pick the tank and spot
Bigger tanks are actually easier: water quality changes more slowly. Place the tank on a strong, level stand, away from direct sunlight (which causes algae) and away from doors that slam.
2. Equipment
- A filter suited to the tank size
- An air pump if your filter does not move the surface enough
- An LED light on a timer, about 8 hours a day
- A water conditioner to remove chlorine from tap water
- Gravel or sand, and decorations with no sharp edges
3. Fill and condition
Rinse gravel and decorations with plain water (no soap). Fill the tank, add water conditioner as the bottle says and switch on the filter.
4. Let the tank "cycle"
Run the filter for one to two weeks before adding fish, so helpful bacteria can grow. Add only a few hardy fish at first, then more after another couple of weeks.
5. Feeding
Feed small amounts once or twice a day, only what the fish eat in two to three minutes. Overfeeding is the number-one cause of cloudy water.
6. Weekly care
- Change 20 to 25 percent of the water every week, using conditioned water at a similar temperature.
- Rinse the filter sponge in the old tank water you removed, never under the tap.
- Wipe algae from the glass.
Warning signs
Fish gasping at the surface, staying at the bottom or with spots or torn fins usually mean water quality is off. Do a partial water change and check your feeding.
Mymensingh Pet Shop sells fish food, filters and pumps, lights, decorations and water care products to help you start right.
